Introduction to the newline guide to building and deploying a REST API using Deno.

Welcome to Build and Deploy a REST API with Deno!

In this lesson, we will install Deno and create our setup for the rest of the course.

How to Install Deno Locally and in Docker Containers

Introduction

Deno vs Node: A Deno Fresh Start to JavaScript Runtimes

We will look at the command line interface for running Deno

How to Use the Deno REPL Command Line Interface

In this lesson, we will look at general usage of Deno by running a file and also introduce the config file

Executing TypeScript Files With Deno With the Config File

Learn how to use the Deno standard library and other external modules with URL imports

Deno vs Golang's Standard Library

How to Start a Deno Server and Set Permissions

You will learn how to make a simple token authentication in Deno

How to Build a Token Authentication Server With Deno

Getting Started with Deno

Using Databases with Deno

How to Use PostgreSQL in Docker with Deno

How to Integrate MySQL or MariaDB With Deno

How to Add SQLite to Deno with deno-sqlite

Connect to a database

Introduction to database migrations - what, why and how

What is Database Migration? The Strategy to Migrate Data

Get started with database migrations using Nessie

How to Add Nessie to Deno to Migrate Databases

We will go through creating a migration using the Nessie CLI

How to Create a New Database Migration With Deno Nessie

We will look at how to write a migration script where we create a table

Edit a Deno Nessie Database Migration to Catch Errors

We will run our migration and learn how to roll back the migration

How to Run and Roll Back a Database Migration With Deno Nessie

We will create a seed file using the Nessie CLI

How to Create a Database Seed File With Deno Nessie

We will run our seed file and populate our database

How to Import JSON Data and Seed a Database With Deno Nessie

Database migrations

Introduction to the concept of REST APIs and why we use them

REST API Introduction

We will go through the thought process of planning an application.

Best Practices for a REST API: Endpoints and Database Schema

We will create the initial project files and set up our environment

How to Prepare Deno to Build a REST API

We will create the router and look at how to test our endpoints

How to Build REST API Endpoints in Deno

It's time to add Nessie! We will now initialize Nessie in our project and also spin up our development database

Integrate a PostgreSQL Database With Nessie Into a Deno API

Time to connect our models to our database!

Building a MySQL or PostgreSQL Database Pool in Deno

In this step, we will create our first data model and create a corresponding table using a migration

Migrating Data to PostgreSQL and Modeling Data in Deno

Creating the methods to access the database

Build API Calls That Generate SQL Queries in Deno

Creating the server endpoints for the Duck namespace

Create a Database Controller in Deno

We will look at how to set up authentication and further authorize the requests

How to Authenticate and Authorize REST API Requests in Deno

We will create two new tables using a migration and create the equivalent models

Create New Tables and Models With Deno Database Migration

We will create our Quack service and controller

Add List, Create, Read, Update, and Delete Requests in Deno

The last stretch! We will create our final namespace, Crumb, and connect it to our other models and our router

How to Build Many-to-Many Namespace Connections in Deno

Now that our application is completed, we will consider some improvements and discuss alternative approaches.

API Afterthoughts

REST API

We will introduce deployments and what we will learn in this module

Deployment Introduction

We will create a Docker image for our application

How to Create a Docker Image to Containerize an Application

You will learn how to create a basic CI file for GitHub and GitLab, and run tests on them

How to Create Continuous Integration Files for GitHub and GitLab

We will deploy our application to a server using CI, SSH and git.

How to Deploy a Deno API Server With the Digital Ocean API

We will deploy our application to Digital Ocean Apps. This is by far the easiest (but most costly) approach.

How to Deploy a Deno Docker Image to Digital Ocean

Similar to how we did it in lesson 1, we will be deploying using CI and SSH, but instead of git, we will be using Docker.

Deploy with Docker

Deployment

In this course, we will learn how to work with [Deno](https://deno.land) to create a REST API using TypeScript with the web framework [Oak](https://github.com/oakserver/oak) and the migration tool [Nessie](https://github.com/halvardssm/deno-nessie). 
Deno is a JavaScript runtime created by [Ryan Dahl](https://tinyclouds.org), the same creator for Node, as an attempt to simplify the JavaScript landscape by strictly following the WebAPI specs. 
If you are interested in learning more about the motivation behind Deno, you can watch this video where Ryan Dahl explains "[10 Things I Regret About Node.js](https://www.youtube.com/watch?v=M3BM9TB-8yA)"

We will explore how to create an application using the powers of TypeScript, and learn how to traverse the Deno ecosystem which is much like the native web ecosystem. 
There are 5 modules that will take you from installing Deno and running your first lines of code, to working with web frameworks and databases, and in the end, deploying your application to a web server using a deployment pipeline.

Throughout this course, you will experience all the different aspects of Deno which you will need to create your own application in the future. 
And from this course, you will get a good feeling for if Deno is ready to be your next default for new projects.

In this course, we will learn how to create and deploy a REST API with Deno from scratch.

Build and deploy a REST API with Deno

Integrating databases into your application

Importance of database migrations in production applications

Deploying Deno applications to production using CICD

In this lesson, we will take a closer look at MySQL. This database system
emerged around the same time as PostgreSQL, and while PostgreSQL is known for
its advanced features, MySQL is known for its popularity, and is used as the
default by projects like WordPress.

MariaDB is a community fork of MySQL which was created after the Oracle
acquisition of MySQL in 2009. It was intended to be a drop in replacement for
MySQL, although it diverges in some cases. If you prefer to use MariaDB, you
should not face any troubles and can follow the same steps beneath.

 but transferred to Deno Drivers in the attempt to unify database
client interfaces between databases. 

 also supports MariaDB, so if
this is your preferred fork, you have the freedom of choice.

For this step, we need two things: a MySQL (or MariaDB) database, and a Deno
script. This script will create a connection from our code to our database which
will allow us to save and fetch data.

I will be using Docker for the database, but you can also install it locally by
following the steps for

,
however, the Deno client does not yet support authentication for version 8 or
newer, so we will disable password login for our purposes. You can follow the
issue 

To start the database using Docker, you can run this command. You can leave the
terminal session open for the rest of this step, and if you get any permission
errors you can prefix the command with 

# MySQL
docker run --rm -p 3306:3306 -e MYSQL_ALLOW_EMPTY_PASSWORD=yes mysql

# MariaDB
docker run --rm -p 3306:3306 -e MYSQL_ALLOW_EMPTY_PASSWORD=yes mariadb

If you receive any errors regarding port allocation, it probably means that
you are already using that port for something else. Try to change the first
port to something else e.g. 

, to host our script in. We
start by importing the client.

import { Client } from "https://deno.land/x/mysql@v2.10.2/mod.ts";

---
title: How to Integrate MySQL or MariaDB With Deno
description: Using the MySQL client for Deno
code: https://gitlab.com/fullstackio/books/newline-course-apps/halvard-morstad-build-and-deploy-a-rest-api-with-deno-app/-/tree/main/app_with_sqlite_db%20(updated)/module_2?ref_type=heads
---

## MySQL and MariaDB

In this lesson, we will take a closer look at MySQL. This database system
emerged around the same time as PostgreSQL, and while PostgreSQL is known for
its advanced features, MySQL is known for its popularity, and is used as the
default by projects like WordPress.

> MariaDB is a community fork of MySQL which was created after the Oracle
> acquisition of MySQL in 2009. It was intended to be a drop in replacement for
> MySQL, although it diverges in some cases. If you prefer to use MariaDB, you
> should not face any troubles and can follow the same steps beneath.

We will start this lesson by choosing `deno_mysql`, originally created by
`manyuanrong` but transferred to Deno Drivers in the attempt to unify database
client interfaces between databases. `deno_mysql` also supports MariaDB, so if
this is your preferred fork, you have the freedom of choice.

You can find the library [here](https://github.com/denodrivers/mysql).

### Installation

For this step, we need two things: a MySQL (or MariaDB) database, and a Deno
script. This script will create a connection from our code to our database which
will allow us to save and fetch data.

I will be using Docker for the database, but you can also install it locally by
following the steps for
[MySQL](https://dev.mysql.com/doc/mysql-getting-started/en/) or
[MariaDB](https://mariadb.org/download/).

> The default username for `MySQL` is `root` and the password is `root`,
> however, the Deno client does not yet support authentication for version 8 or
> newer, so we will disable password login for our purposes. You can follow the
> issue [here](https://github.com/denodrivers/mysql/issues/37) if you want more
> information.

#### Using Docker

To start the database using Docker, you can run this command. You can leave the
terminal session open for the rest of this step, and if you get any permission
errors you can prefix the command with `sudo`.

```shell
# MySQL
docker run --rm -p 3306:3306 -e MYSQL_ALLOW_EMPTY_PASSWORD=yes mysql

# MariaDB
docker run --rm -p 3306:3306 -e MYSQL_ALLOW_EMPTY_PASSWORD=yes mariadb
```

-   `--rm` will clean up the container after you kill it. You can read more about
    it [here](https://docs.docker.com/engine/reference/run/#clean-up---rm).
-   `-p` is short for `--port`. It links a port on the container with a port on
    your local system, allowing you to connect to it.
-   `-e` is short for `--env`. It is used to pass in an env variable to the
    container.

> If you receive any errors regarding port allocation, it probably means that
> you are already using that port for something else. Try to change the first
> port to something else e.g. `3307:3306`

### Writing the connection

For `MySQL` we create a new file called `mysql.ts`, to host our script in. We
start by importing the client.